Cold Plunge Chiller and Filter 1HP Ice Making to 0°C with WiFi and Ozone

CHU-10-RV Ice Making Cold Plunge Chiller

The CHU-10-RV ice making cold plunge chiller is a 1HP system designed for buyers who need freezing-point cooling rather than a standard cold-water machine. With a 0–40°C adjustable range, 2.81kW cooling capacity, heating, ozone sanitation, external filtration, and WiFi control, it supports cold plunge, ice-bath, and contrast-therapy product packages.

This cold plunge chiller and filter is configured for 110–120V / 60Hz markets. It combines an 88W DC self-priming circulation pump, quick water connections, transport wheels, carry handles, and a mobile cabinet to simplify integration with a compatible insulated tub.

Why Choose an Ice Making Cold Plunge Chiller?

A standard chiller may stop at typical cold-plunge temperatures, while the CHU-10-RV is designed to reach 0°C under suitable operating conditions. This ice making cold plunge chiller is therefore positioned for buyers who want visible surface ice capability, deep-cold product differentiation, and a stronger premium recovery-system offer.

Actual ice formation depends on tub insulation, water volume, starting temperature, ambient temperature, plumbing layout, heat load, and run time. Confirm these conditions before promising a specific cooling time or amount of ice.

0°C Ice-Making Cooling and Heating up to 40°C

The ice making cold plunge chiller uses a 1HP system with 2.81kW cooling capacity and a 0–40°C adjustable water-temperature range. It supports both freezing-point cooling and warm-water operation, allowing buyers to plan cold plunge and hot-cold contrast-therapy programs around one machine.

• 0°C target capability: Designed for freezing-point operation and possible surface ice formation in a suitable insulated setup.
• Heating function: Supports warm-water operation up to 40°C for contrast-therapy configurations.
• Project-based performance: Final results depend on the complete tub, insulation, plumbing, environment, and use pattern.

Ozone, External Filtration and Self-Priming Circulation

The cold plunge chiller and filter combines water-temperature control with an ozone generator, external replaceable filter, and 88W DC self-priming circulation pump. This creates a more complete water-management loop than a cooling-only machine.

• The external filter helps capture visible debris and can be accessed for cartridge inspection and replacement.
• The ozone function supports managed water sanitation as part of a complete cleaning routine.
• The DC self-priming pump circulates water without requiring a separate external circulation pump.
• Quick connectors support a cleaner chiller-to-tub installation.

Filtration and ozone do not remove the need for routine water checks, filter maintenance, tub cleaning, and operation according to local guidance.

WiFi Control and Mobile Product Design

The ice making cold plunge chiller supports WiFi app operation on iOS and Android devices. A top-mounted control panel provides local access to supported settings, while the app adds convenient temperature and operating control for homes, studios, gyms, spas, and recovery spaces.

Carry handles and transport wheels help with positioning and service access. The rear condenser fan and ventilation panels require clear airflow, and outdoor installations should be protected from direct rain, standing water, blocked airflow, and unsuitable electrical exposure.

Buyer and Project Applications

Compatible Tub and Installation Planning

The ice making cold plunge chiller can be matched with compatible stainless steel, acrylic, insulated rigid, or suitable portable tubs. Tub insulation is especially important when targeting 0°C and visible ice. Larger water volumes, high ambient temperatures, frequent use, weak insulation, and long plumbing runs increase the cooling load.

• Confirm the tub material, usable water volume, insulation, and cover.
• Confirm inlet/outlet size, hose length, connector layout, and drainage plan.
• Provide the destination country and verify 110–120V / 60Hz power availability.
• Allow adequate ventilation around the rear fan and side panels.
• Provide target temperature, starting water temperature, ambient range, and daily use schedule.

OEM and Bulk Order Preparation

For distributors and private-label buyers, the cold plunge chiller and filter can be discussed together with exterior presentation, logo placement, plug, connectors, accessories, packaging, documentation, sample requirements, and estimated quantity. Available customization must be confirmed before production.

Before requesting a quotation, send the destination market, tub type and capacity, target temperature, installation environment, expected quantity, and branding requirements. This information allows OMNI to confirm whether the CHU-10-RV configuration is suitable for the project.