Cartridges, housings & strainers
Share the chiller model, housing arrangement, cartridge dimensions and end-cap shape if visible.
Cold plunge parts · model compatibility before supply
Cold Plunge Parts & Replacement Components
Cold plunge parts can look similar while using different dimensions, connectors or electrical versions. Start with the equipment model and identify the existing component before requesting a replacement.
Model firststart with the exact equipment identity
Photo secondshow the label and both connection ends
Quote lastconfirm compatibility before supply
What needs replacing?
Cold plunge chiller replacement parts by component.
A useful first enquiry identifies the existing component and the equipment it belongs to. A similar-looking part is not a confirmed substitute.
Hoses, fittings & seals
Show both ends, the installation position and any existing part reference. Do not infer thread size from a photo alone.
Pumps & water-loop items
Provide the unit model and pump label where safely accessible. Power alone does not establish a compatible replacement.
Model-specific electrical items
For controllers, sensors or unidentified items, send the model, serial/order reference and a clear external photo.
Why the model matters
Ice bath chiller accessories must match the model.
These brochure examples explain why one “universal” cold plunge replacement kit would be misleading.
CHU series
External filtration direction
CHU model tables identify external filters and an 88 W DC circulation-pump motor. Accessory lists differ between CHU-05 and larger CHU models.
Checkhousing + cartridge size
Also identifyvoltage/version
CHM-10
Internal filter direction
The CHM-10 brochure lists an internal filter, built-in self-priming circulation and 10-inch filter elements in the accessory spread.
Checkexact element + housing
Also identifyRV or RW version
CH-08
Cooling-only water-loop direction
The accessory image contains several translated connector labels that require a current drawing before dimensions are used for replacement supply.
Checkthread + hose ID/OD
Avoidphoto-only sizing
Tub interface
Connections must match both products
A hose or fitting may need to match the chiller, tub port, pump and installation route. Include both equipment references where relevant.
Sendboth connection ends
Confirmsupplied seal/fitting
Prepare a useful parts request
Four items make compatibility checking faster.
You can start even if the part name is unknown. Use safe, external identification only.
Modelequipment label or order
Partphoto + installation point
Measuresafe external dimensions
Destinationcountry + quantity
Existing equipment support
Safety and after-sales questions use a direct route.
Do not open electrical panels, defeat guards or run a pump dry to identify a component. A parts quotation is not required to ask for necessary support.
Warranty or service question
Include the order reference, model, issue description and any visible error information.
Open after-sales supportUnknown component
Send an external photo of the part in place and the equipment label. Do not dismantle the unit for identification.
Contact OMNI IcePlanned spare package
For a new equipment order, ask which filters, seals or service items belong to the selected configuration.
Review OEM scopeCommon questions
Cold plunge parts: compatibility questions.
Can I order a filter using only its length?
Not reliably. Diameter, end caps, housing and micron specification may also matter.
Is an 88 W pump automatically interchangeable?
No. Voltage, connector, mounting, flow/head requirements and control interface also need to match.
Can OMNI Ice quote a part if the model label is missing?
A clear photo, order reference, overall equipment view and safe external measurements may help identify the correct next step.
Check the model before supply
Send the equipment identity and the part you need.
Include the model, destination, quantity and clear external photos so compatibility can be reviewed before quotation.