WT-03 Acrylic Cold Plunge Tub – Hot & Cold Therapy Bath

The WT-03 acrylic cold plunge tub is a full-size freestanding bath for cold-water immersion and warm soaking projects. Its clean rectangular form, glossy white finish and smooth interior suit home wellness rooms, private gyms, recovery studios, spas and hospitality installations. The bath is supplied as a formed acrylic shell and connects to separately selected circulation, cooling or heating equipment according to the project.

This acrylic cold plunge tub measures 1700 × 800 × 600mm and has a listed net weight of 60kg. Its elongated chamber supports a more reclined bathing position than compact upright barrels. Before installation, buyers should confirm door access, the final filled load, floor support, water supply, drainage, service clearance and the location of any external chiller or heating system.

Glossy Acrylic Construction for Cold and Warm Water Use

The WT-03 uses a glossy white acrylic body with a smooth, non-porous surface. The seamless-looking interior is practical to wipe after each session and gives the product a familiar bathtub appearance rather than an industrial tank profile. The gently angled ends support a comfortable bathing position while keeping the exterior visually simple.

As an acrylic cold plunge tub, WT-03 should be cleaned with mild soap and a soft, non-abrasive cloth or sponge. Harsh solvents, abrasive pads and incompatible chemicals may dull or damage the acrylic finish. Commercial operators should define a cleaning and water-treatment routine based on usage frequency and the selected circulation system.

Cold Plunge or Hot Soak with Separately Selected Equipment

The bath itself does not contain a compressor, heater, pump, filter, ozone generator or WiFi controller. For cold immersion, connect the WT-03 to a suitable external chiller and circulation system. Published product information describes 3–5°C cold-water use when the complete system is correctly selected. Actual temperature and cooling time depend on chiller capacity, starting water temperature, ambient conditions, insulation and daily usage.

For warm soaking, pair the acrylic cold plunge tub with compatible heating-capable equipment. Published information describes warm-water use up to 38–42°C, but the final permitted temperature must follow the selected equipment, plumbing components, local installation requirements and user safety guidance. Never copy a chiller’s technical features into the bathtub specifications unless that equipment is included in the quotation.

Water Connections, Center Drain and System Planning

WT-03 includes a center drain and external connection ports that support a planned water loop. The source images show hoses connecting the bath to a separate cooling unit. Port size, hose type, fittings, pump, filtration and sanitation components must be confirmed for the quoted package rather than assumed from the photograph.

A complete acrylic cold plunge tub project needs controlled drainage, watertight connections and convenient access for inspection. Install the external equipment where it receives the required ventilation and stays clear of the user’s entry route. Electrical equipment must be located and protected according to the manufacturer’s instructions and applicable local codes.

Confirmed WT-03 Product Information

Installation, Cover and Routine Maintenance

Place the acrylic cold plunge tub on a level, load-bearing surface designed for the combined weight of the bath, water and user. Provide a safe entry zone and enough clearance to clean the exterior and inspect the connections. The source set includes a fitted insulated cover; confirm whether it is included in the final quotation. A cover can reduce debris and slow heat gain but is not a structural platform.

• Inspect the acrylic surface, drain, external ports and fittings before filling.
• Use non-abrasive cleaning materials that are compatible with acrylic.
• Check every hose connection for leakage before operating the circulation system.
• Follow the separate chiller, heater, filtration and sanitation instructions.
• Keep the floor dry and maintain a clear, slip-controlled entry path.

Home, Spa and Commercial Wellness Applications

The clean white finish makes this acrylic cold plunge tub suitable for modern bathrooms, poolside recovery areas, boutique spas, hotel wellness rooms, private gyms and physiotherapy environments. Long-term outdoor installation requires site-specific protection, drainage and material-care planning; buyers should confirm the intended environment before ordering.

OEM and Bulk-Order Support

OMNI can discuss branding, approved finish requirements, connection planning, accessories, manuals, packaging and bulk-order coordination. Structural or plumbing changes require technical confirmation before production. The current product information lists wood-frame-box packaging, while actual export marks and reinforcement should be confirmed for the destination and shipping method.

For a WT-03 acrylic cold plunge tub quotation, send the destination country, quantity, cold or warm application, target water temperature, external equipment requirement, installation environment, branding request, packaging needs and delivery schedule.